Clock Sync Parameters
=====================

From a Patch:
COMMON/<Default Tempo> 2 to 250 BPM
EFX/<Control2> Patch Control Sources 2/3
      LFO1
      LFO2
EFX/<Destination> for Patch Control Sources 1/2/3
   Pitch
   Cutoff frequency
   Resonance
   Level (volume)
   Pan
   Volume output from MIX OUT
   Chorus depth
   Reverb depth
   Depths of LFO 1 or 2 applied to Pitch, Cutoff, Volume and Pan
WAVE/Tone Delay/Clock-Sync
LFO/<ExtSync> for LFO 1 & 2 External Sync

The related Performance parameters are
PERFORM/COMMON/PERFORM CLOCK for Default Tempo (in JVs only).
PERFORM/COMMON/PERFORM CLOCK for Source and Tempo (in XPs only).

Also related in the SYSTEM menus are:

in the XPs SYSTEM/SEQ/SEQ MODE SyncMode setting of
INTERNAL/REMOTE/SLAVE, or in the JVs SYSTEM/MIDI/PERFORM MIDI
Clock setting of INT or MIDI.

From the above it should be fairly obvious that LFOs can have a
TREMENDOUS amount of CONTROL of a song's Performance parameters.
The simultaneous ability to have an external (or internal MASTER
clock source) for syncing LFOs to which can then so
comprehensively control so many other parameters for each Tone
within each assigned Patch in each Part of a Performance can
indeed be "mind-boggling".